Out-of-Stock Bultaco 74 - 125 Sherpa & Lobito, con rod kit (Piston Axle diameter 14mm) Crankshaft axle 18mmx48mm. Piston axle diameter 14mm (see details below) €167.00
Available Bultaco 74 - 125 Sherpa & Lobito , con rod kit (Piston Axle diameter 16mm) Crankshaft axle 18mmx48mm. Piston axle diameter 16mm (see details below) More details €167.00
Available Bultaco 125 Pursang, con rod kit Crankshaft axle 18mmx48mm. Piston axle diameter (see details below) €167.00
Available Bultaco 250 con-rod kit Pursang & Alpina First model with crank shaft 18mm axle, piston axle 16mm (see details below) €167.00
Available Bultaco 250 con-rod kit Sherpa, Pursang & Frontera model with crank shaft 24mm x 56mm axle (From type 159) piston axle 16mm (see details below) €157.00
Available Bultaco 325 Sherpa, Alpina, Pursang con rod kit For models with crankshaft axle 20x46 to 48mm . Also OK for all 250 Sherpa with 20mm cranshaft axle after 1974 (see details below) €177.00
Available Bultaco 325 con rod kit Sherpa, Alpina & Pursang Crankshaft axle 20mmx56mm. Also OK for 250cc with 20mm crankshaft axle. Piston axle 20mm (see details below) €167.00
Available Bultaco 350 Sherpa (340 - 6 speeds) con rod kit For models with crankshaft axle 24x56 mm . Piston axle 20mm (see details below) €177.00
Available Bultaco Sherpa T 125cc piston with clips pin and rings diam 54.45 mm 156 & 195 series €187.00
Available Bultaco Lobito 125cc piston with clips pin and rings diam 54.45 mm 127 & 148 series €175.00
Available Bultaco 250 - 270 piston with clips pin and rings diam 76 mm To transform a 250 Bultaco into a 270 cc one. €197.00
Available Fantic 125 & 200 con rod kit 125 Type TX250 from 1979 to 1981 - 200 Type TX350 from 1980 to 1981 €149.00
Available Fantic 300 to 309 con rod kit For models 300 twinshocks plus 305 - 307 - 309 from 1989 to 1991 €167.50
New Available Fantic 125 (TX250) Piston kit size 55mm For twinshock 125 Fantic (TX 250) code "B" €249.00
Available Honda TL 150cc piston Only with 124cc cylinder. 124 must be engraved at the back of you cylinder to be able to be rebored in 61mm. Otherwise, the sleeve will be too thin. €255.00
Available Honda 150 TL rings set piston rings are 1 st over size so you will need to gap them down to size to have a play of 0.25 to 0.45mm €59.95