Home

Out-of-Stock

Turn signal fixing brackets pair

Turn signal pair of fixing brackets for forks (30 to 45mm diameter)

€12.70

Out-of-Stock

Bultaco 74 - 125 Sherpa & Lobito , con rod kit (Piston Axle diameter 16mm)

Crankshaft axle 18mmx48mm. Piston axle diameter 16mm (see details below) More details

€167.00

Available

Aluminim BSA Plate

 Ø 30 cm.

€28.95

Out-of-Stock

Alloy powder coated white front plate

€19.70

Available

Loctite black silicone

Filling gap up to 5mm. Temperature resistance -55° to 250°

€20.95

Available

L size pair of gloves

€25.95

Out-of-Stock

One litter additionnal tank

€68.95

Available

BULTACO 350 from 1973 complete engine rebuilt kit

Complete rebuild kit for lower engine. Includes bearings, spy seals and all engine gaskets (crankcase gasket, baseplate, ignition, etc.) Purchasing this complete kit is not...

€200.00

Available

Aluminium Professional Varnish 250ml

Need help protecting aluminum, light alloys and yellow metals for the long term? Restom AluFilm 4040  is a one-component, glossy and colorless epoxy varnish for the...

€27.95

Available

Lot of 4 Shocks fixing rubber pads

For all Betor, Pro Expert shock etc 

€16.95

Available

Bultaco Decal set type 198 & 199

€46.95

Available

HONDA TLR 125 to 250 kickstarter return spring

HONDA TLR 125 to 250 kickstarter return spring

€18.95

Available

Carburetors pipe Air vent. (80cm )

.

€4.70

Available

Lub for chain (400ml)

Has excellent adhesion to chain parts, reduce friction and makes the chain and O'rings flexible

€11.95

Available

Bultaco Clutch set 125, 250 & 350 twinshock

Those disks are steel and hence no friction plates. Your clutch is slipping when using the last gear ? You have to know that (Except Montesa Cota) The springs are responsible...

€165.95

Available

Aluminium right side chain guard with fixing

€89.95

Available

Bearing (12x32x10) 6201 EE

BULTACO all models (twinshock) front wheel right & left. HONDA TLR 200 front wheel right & left, rear wheel right OSSA 250 & 350 front and rear wheel right...

€12.70

Available

Bearing (12X32X10) 6201

MONTESA Cota 348 & 349 primary shaft right side.  Unit price.

€10.95

Available

Bearing, métalic HK case 6,5X10X9

.

€7.75

New

Available

Flexible tank cap

No more headaches about how to close tank inlets and outlets! These cylindrical latex plugs, in two different sizes, will enable you to block your tank inlets and outlets...

€2.50

Available

Lot of 4 Shocks fixing rubber pads (Betor/Telesco)

Set of 4 rubber mounting blocks for Telesco or Betor shock absorbers. Dimensions: Inside: 15mm Outside: 22,5/25mm Length : 23,5mm

€12.95

Available

Bultaco Alpina 250 & 350 (1973 to 1979) Front fork tubes

New pair of fork tubes for Bultaco Alpina models from 1973 to 1979, these will fit the Bultaco Enduro models below, which were fitted with Betor forks when new, these tubes may...

€158.95

Available

Universal clutch cable kit (2.35m)

Repair kit including 3 cables (Brake 1.8m, clutch 1.8m & throttle 1.2m) plus their 3 universal stop-scews

€29.95

Yamaha TY 125 (from 1990)

Yamaha TY 125 from 1990 " Japanese air in the wheels   Choosing only 7 pictures to present it to you on our website was difficult, as the bike is original, from every...

Available

Gasket sheet 45cm x 30cm thickness 0.80mm

Here is the perfect solution to create even joints that no longer exists on the market.  Unit price.

€11.50

Available

Turn signal 6/12v bulb

Compatible with the pair of universal turn signal pair sold on the site.

€1.70

Available

Bultaco 125 Pursang, con rod kit

Crankshaft axle 18mmx48mm. Piston axle diameter (see details below)

€167.00

Available

Aluminim TRIUMPH Plate

42 x 25 cm

€28.95

Available

Bultaco Sherpa seat

before 198 model

€179.95

Available

DELLORTO carburetor PHBL22 BS for Montesa Cota 123

Dellorto carburettor prepared for MONTESA Cota 123. Sold with specific mounting flange (distance between the two mounting holes 51mm). For assemblies with an intake pipe...

€184.95

Available

XL size pair of gloves

€25.95

Available

BULTACO 199B (340-6 speeds) complete engine rebuilt kit

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

€225.00

Available

Bultaco Clutch set Type 49

Those disks are steel and hence no friction plates

€127.00

Available

Bultaco Decal set type 198A & 199A

€46.95

Available

Montesa Cota 123/172/200/242/304/307/309/310 kickstart return spring

€18.95

Available

44 balls for Bultaco & Montesa front brackets

4.8mm balls

€32.95

Available

Sheet rock wool

For reconditioning your exhaust silencer. Size: 350x500mm Resistance: 560° temperature

€14.75

Available

Chain link wrench 415 to 530 link size

Chain 428 (Link size 415 to 530)

€25.95

Available

Washer 10X21X5

Yamaha TY 50, 80, 125, 175 & 250 Twinshocks Oil pump injection axle.  Unit price.

€7.95

Available

Tyre-lever

 professional 38cm long

€19.95