Engine

Available

Bearing (17X47X14) 6303

BULTACO (all twinshock models) primary shaft right side (clutch output).  MONTESA cota 123, 172 & 200 left secondary shaft (gearbox axle sproket), MONTESA cota 247...

€12.95

New

Available

Inlet pipe (Ø 30mm, entraxe 50mm)

Intake pipe for fitting a Dellorto PHBL 22 BS carburetor to a Montesa Cota 123. Internal diameter on carburettor side: 30mm Fixing screw centre distance: 50mm Inlet...

€30.95

New

Available

Yamaha TY 50 et 80 electronic ignition 12V

Comes with (French & english) instruction sheet. With lighting coil regulated in 12v

€385.95

Out-of-Stock

Bultaco 250 - 270 piston with clips pin and rings diam 76 mm

To transform a 250 Bultaco into a 270 cc one.

€197.00

Available

Bultaco 350 Alpina et 350 Sherpa gasket set

Motors with 8.5cm stud spacing. Gasket set compatibility : Bultaco Alpina 350 (Mod 166 from 1976) Bultaco Alpina 350 (Mod 188 from 1976 to 1977) Bultaco Sherpa T...

€49.70

Available

YAMAHA TY 175 complete engine rebuilt kit

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

€218.00

Available

Bultaco Sherpa 250 & 350 oil drain plug

with magnet and washer

€13.95

Available

HONDA clutch plate bolt key

€24.95

Available

Washer 14X20X3

BULTACO Internal secondary shaft left side (gearbox axle sproket).  Unit price.

€9.95

Available

NGK spark plug B7ES

Yamaha TY 125 to 250. SUZUKI RL & Beamish. Egal to Champion N4C - Bosch W7CC

€5.95

Available

bearing 16X20X19.5

Yamaha TY 125 & BULTACO 250 con-rod small end.

€17.95

Available

Bearing (20X47X14) 7204

MONTESA cota 247, 348 & 349 primary shaft left side (clutch output), MONTESA cota 348 & 349 secondary shaft right side (gearbox axle sproket).  Very technical...

€36.95

Available

Inlet pipe (Ø 35mm, entraxe 50mm) Dellorto

Inlet pipe Internal diameter on carburettor side: 35mm Fixing screw centre distance: 50mm Inlet outlet diameter: 30mm

€29.95

Available

Bultaco 350 Sherpa T (Type 199) and Alpina (Type 213) gasket set

Bultaco Sherpa T (Type 199) and Alpina (Type 213)

€41.95

Available

YAMAHA TY 250 twinshock complete engine rebuilt kit

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately. ATTENTION  : The secondary shaft right...

€215.00

Available

Bultaco Sherpa 250 & 350 fly wheel bolt

€19.95

Available

Bultaco 350 piston with clips pin and rings diam 83.6 mm

€224.95

Available

Bearing (20X47X14) 6204

FANTIC 240 (FM450), 300 (FM403), 301 (FM266) & 303 (FM364) primary shaft left side (clutch output).  HONDA TLR 200 secondary shaft left side (gearbox axle sproket)...

€12.70

Available

NGK spark plug

B8ES TY 250 monshock road utilisation. Egal to :  Champion N3C - Bosh W4CC

€5.95

Available

YAMAHA TY 125 & 175 electronic ignition 12V

Comes with (French & english) instruction sheet. With lighting coil regulated in 12v

€439.95

Available

HONDA TLS & TLR 125 - TLR 200 & 250 clutch plate set

Your clutch is slipping when using the last gear ? You have to know that The springs are responsible for 50% in that case (Except Montesa Cota)... So Think to change them...

€39.95

Available

Bultaco 350, exhaust gasket

56mm between holes.

€14.95

Available

bearing 16X20X22.5

OSSA 350 connecting rod for piston refabricated France Trial Classic Yamaha TY 175 con-rod small end

€16.75

Available

Washer 14X20X5

MONTESA cota 348 & 349 clutch control. Unit price.

€7.95

New

Available

Inlet pipe (Ø 35mm, entraxe 50mm) Mikuni

Inlet pipe for fitting a Mikuni VM26 carburetor to the Montesa/Bultaco. Internal diameter on carburettor side: 35mm Fixing screw centre distance: 50mm Inlet outlet...

€30.95

Available

Bearing, métalic BK 16x22x16

OSSA 250 & 350 left intermediate shaft. Unit price.

€12.95

Out-of-Stock

YAMAHA TY 250 Twinshock electronic ignition (from 1973 to 1982)

Replacement electronic ignition for YAMAHA TY 250 Twinshock absorbers from 1973 to 1982. New version with lighting coil and regulator in 12 volts. Supplied with a rotor,...

€495.95

Available

Bultaco 350, exhaust gasket

52mm between holes.

€14.95

Available

Bultaco Sherpa 125,250 and 350 clutch case washer

€7.95

Available

YAMAHA TY 250 monoshock complete engine rebuilt kit

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

€255.00

Out-of-Stock

Bultaco 350 piston with clips pin and rings diam 84mm

€225.00

Available

HONDA 125 TLR or TLS, 200TLR , 250TLR metalic clutch plate set

Your clutch is slipping when using the last gear ? You have to know that The springs are responsible for 50% in that case.(Except Montesa Cota).. So Think to change them...

€49.95

Available

NGK spark plug BP7ES

Egal to Champion N79Y , N7YC  -  Bosch W7DO W6DC

€6.95

Available

Bearing (20X47X14) 6204 J30 / C3

YAMAHA TY 50 & 80 Crankshaft right and left.  Unit price.

€11.95

Available

Washer 14X22X4

Fantic 125 Pro (FM237) gear lever axle. Unit price

€7.95

New

Available

Inlet pipe (Ø 40mm, entraxe 50mm)

Inlet pipe Internal diameter on carburettor side: 40mm Fixing screw centre distance: 50mm Inlet outlet diameter: 30mm

€30.95

Available

Bearing, métalic HK case (16x24x13) RNA 4901

BULTACO 340 (6 speeds) few model, intermediate shaft left side.  Unit price.

€26.95

Available

Bultaco 250 & 350 center cases washer

€8.70

Available

Bultaco - Ossa - Montesa Exhaust waxher

.45 x 53 mm Bultaco before 1973,  Montesa Cota 74 to 125 - Ossa 

€7.95

Available

Bultaco Ignition case rubber

€9.95