List of products by brand Bultaco

Showing 1-207 of 207 item(s)

Decorative plates

Aluminim BULTACO Plate

Bultaco

PLBUL-E

€28.95

Ø 30 cm.

Rebuilt kit

BULTACO 125 complete engine rebuilt kit

Bultaco

PB125-K

€195.00

Lobito T 74 (MK9) mod 155, Lobito T125 (MK9) Mod 156 , Frontera 74 Mod 174, Sherpa T74 Mod 184, Sherpa T125 Mod 185, Frontera 125 Mod 186. Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

Mudguards stays

Bultaco Sherpa 250 / 350 pair of steel mudguard stays finished in chrome

Bultaco

1157-K

€74.95

guenine fixing system

Springs (Engine)

Bultaco Sherpa kick start return spring

Bultaco

R10-G

€18.95

Decorative plates

Aluminim BULTACO Plate

Bultaco

PLSherpaT-E

€28.95

Ø 30 cm.

Bultaco 74 - 125 Sherpa & Lobito, con rod kit (Piston Axle diameter 14mm)

Bultaco 74 - 125 Sherpa & Lobito, con rod kit (Piston Axle diameter 14mm) 2

Rupture de stock

Pistons and con rods

Bultaco 74 - 125 Sherpa & Lobito, con rod kit (Piston Axle diameter 14mm)

Bultaco

445C-H

€218.95

Crankshaft axle 18mmx48mm. Piston axle diameter 14mm (see details below)

View

Rupture de stock

Rebuilt kit

BULTACO 250 complete engine rebuilt kit

Bultaco

PB250-K

€195.00

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

View

Stickers

Bultaco Decal set type 158 to 191

Bultaco

STICK38-G

€46.95

Type 158-159-182-183-190-191

Montesa and Bultaco kit Taper rollers headbrace bearings (25x45x12)

Front Fork (Rollers & washers)

Bultaco & Montesa Taper rollers pair headbrace bearings (25x45x12)

Bultaco

80-F

€59.70

Montesa and Bultaco all type.

Rebuilt kit

BULTACO 350 from 1973 complete engine rebuilt kit

Bultaco

PB350-K

€200.00

Complete rebuild kit for lower engine. Includes bearings, spy seals and all engine gaskets (crankcase gasket, baseplate, ignition, etc.) Purchasing this complete kit is not only practical, it also represents a saving of 10% compared with buying each component individually.

Stickers

Bultaco Decal set type 198 & 199

Bultaco

STICK43-G

€46.95

Clutch

Bultaco Clutch set 125, 250 & 350 twinshock

Bultaco

244-H

€165.95

Those disks are steel and hence no friction plates. Your clutch is slipping when using the last gear ? You have to know that (Except Montesa Cota) The springs are responsible for 50% in that case... So Think to change them also....

Wheels (Rollers - Washers)

Bearing (12x32x10) 6201 EE

Bultaco

902-F

€12.70

BULTACO all models (twinshock) front wheel right & left. HONDA TLR 200 front wheel right & left, rear wheel right OSSA 250 & 350 front and rear wheel right & left. Unit price

Pistons and con rods

Bultaco 125 Pursang, con rod kit

Bultaco

449-H

€167.00

Crankshaft axle 18mmx48mm. Piston axle diameter (see details below)

Rupture de stock

Seats

Bultaco Sherpa seat

Bultaco

1191B-L

€219.95

Saddle for the Bultaco Sherpa (pre-Model 198). This high-quality reproduction saddle replicates the shape and style of the original saddle for the Bultaco Sherpa Model 198 and earlier models.

View

Rebuilt kit

BULTACO 199B (340-6 speeds) complete engine rebuilt kit

Bultaco

PB6V-K

€225.00

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

Clutch

Bultaco Clutch set Type 49

Bultaco

244B-H

€127.00

Those disks are steel and hence no friction plates

Stickers

Bultaco Decal set type 198A & 199A

Bultaco

STICK46-G

€46.95

Bultaco Sherpa 325 Campeon (model 151) 2

Rupture de stock

Exceptional Motorcycles

Bultaco Sherpa 325 Campeon (model 151)

Bultaco

Cazier

€3,800.00

Selling price 4500€ TTC. Beautiful machine completely restored in 2019/2020 by APTC (Atelier Passion Trial Classic). - Frame treated EPOXY - New paint on the body with RESTOM tank treatment - Title card in the name of the owner The bike is located in the Val d'Oise Engine completely rebuilt with new parts. Piston 85.25, cylinder re-boring,...

View

Fork Tubes

Bultaco Sherpa 250 & 350 Front fork tubes (modern)

Bultaco

TUBEBUL1-J

€158.95

Pair of modern-production fork tubes Suitable for Bultaco Sherpa T from Model 124 onwards and Bultaco Alpina from Model 99 onwards. Dimensions: Ø 35 × 558 mm | Packaging: one pair

Rebuilt kit

FANTIC 240 (FM450), 245 & 305 (FM375) complete engine rebuilt kit

Bultaco

FAN240-K

€158.95

Complete lower engine overhaul kit. Includes bearings, oil seals, all engine gaskets (crankcase gasket, base gasket, ignition gasket, etc.). Please note that the two needle roller bearings for the clutch bell are not included in the kit, as they very rarely need to be replaced. In addition to being practical, purchasing this complete kit represents a 10%...

View

Rupture de stock

Brakes

Bultaco brake / Hub return spring

Bultaco

R15-G

€9.70

View

Rupture de stock

Clutch

BULTACO clutch spring set

Bultaco

E073

€34.95

Your clutch is slipping when using the last gear ? Except for Montesa Cota, you have to know that The springs are responsible for 50% in that case... So Think to change them also....

View

Stickers

Bultaco Decal set type 199B 6 speed engines

Bultaco

STICK49-G

€39.75

Bultaco 250 con-rod kit Pursang & Alpina

Pistons and con rods

Bultaco 250 con-rod kit Pursang & Alpina

Bultaco

446B-H

€167.00

First model with crank shaft 18mm axle, piston axle 16mm (see details below)

Engine spares

Bultaco cylinder rubber

Bultaco

131-H

€3.75

Fork Tubes

Bultaco Sherpa 250 & 350 Front fork tubes (old)

Bultaco

TUBEBUL2-J

€158.95

Pair of tapered fork tubes – early version Suitable for various Bultaco Sherpa, Alpina and Matador models fitted with fork tubes featuring a tapered upper section. See the detailed compatibility list below. Dimensions: Ø 35 × 560 mm | Packaging: one pair

Rupture de stock

Rebuilt kit

300 (FM403), 301 (FM266) & 303 (FM364) complete engine rebuilt kit

Bultaco

FAN300-K

€180.00

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

View

Seats

Bultaco Sherpa seat

Bultaco

SB198-L

€219.95

Saddle for the Bultaco Sherpa (Model 198 and later). This high-quality reproduction saddle replicates the shape and style of the original model used on the Bultaco Sherpa Model 198 and later.

Clutch

BULTACO clutch lever ball

Bultaco

E170

€1.45

Engine gaskets

Bultaco Chispa gasket set

Bultaco

P05-K

€19.95

Chispa (Mod 111 from 1974 to 1980)

Stickers

Bultaco Campeon sticker kit

Bultaco

STICK44-G

€39.95

Bultaco 250 con-rod kit Sherpa, Pursang & Frontera

Pistons and con rods

Bultaco 250 con-rod kit Sherpa, Pursang & Frontera

Bultaco

446-H

€157.00

model with crank shaft 24mm x 56mm axle (From type 159) piston axle 16mm (see details below)

Engine spares

Bultaco Sherpa 250 & 350 primary transmission chain tensioner

Bultaco

227-H

€26.95

Rebuilt kit

Honda TLR 200 complete engine rebuilt kit

Bultaco

HON200-K

€172.95

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

Engine gaskets

Bultaco 74, 75 et 100 Lobito gasket set

Bultaco

P30-K

€44.95

Gasket set compatibility : Bultaco Lobito 74 (Mk3 Mod 59 from 1969 to 1972) Bultaco Lobito 74 (Mk6 Mod 94 from 1972 to 1973) Bultaco Lobito 75 (Mk7 Mod 126 from 1973 to 1974) Bultaco Lobito 100 (Mk3 Mod 54 from 1969 to 1970) Bultaco Tiron 100 (Mod 73 from 1971 to 1974)

Exhaust

7.5 cm BULTACO Rear Silencer fixing spring

Bultaco

E176

€3.95

Clutch

BULTACO Clutch lever (cam)

Bultaco

E186

€29.95

Bultaco 325 Sherpa, Alpina, Pursang con rod kit

Pistons and con rods

Bultaco 325 Sherpa, Alpina, Pursang con rod kit

Bultaco

445B-H

€177.00

For models with crankshaft axle 20x46 to 48mm. Also OK for all 250 Sherpa with 20mm cranshaft axle after 1974 (see details below)

Bultaco Sherpa 250 & 350 primary transmission chain

Rupture de stock

Engine spares

Bultaco Sherpa 250 & 350 primary transmission chain

Bultaco

227B-H

€78.95

View

Brakes

Bultaco Sherpa front and rear brake shoes (Standard)

Bultaco

FREIN36-G

€23.95

Standard smooth trim. Bultaco Sherpa (from Type 124 upwards) front or rear brake pads/shoes. For earlier models, the front shoes remain the same, but for the rear the reference is #FREIN18.

Engine gaskets

Bultaco 125 Lobito and S125 Sherpa gasket set

Bultaco

P28-K

€42.95

Gasket set compatibility : Alpina 250 (Mod 115 from 1974) Lobito 125 (Mk3 Mod 62 from 1970 to 1972) Lobito 125 (Mk4 Mod 74 from 1970 to 1971) Sherpa S125 (Mod 43 from 1968 to 1969) Sherpa S125 (Mod 63 from 1970 to 1972)

Exhaust

6 cm BULTACO Exhaust fixing spring

Bultaco

E180

€2.95

Bultaco Sherpa 125 primary transmission chain

Rupture de stock

Engine spares

Bultaco Sherpa 125 primary transmission chain

Bultaco

227B2-H

€78.95

For 125T models except Lobito

View

Stickers

Bultaco pair of tank stickers . diameter 5.7cm

Bultaco

STICK6-G

€18.95

Ignition

BULTACO 125, 250 & 350 Trial (all models) electronic ignition

Bultaco

600-I

€449.95

Comes with (French & english) instruction sheet without flywheel extractor (27x125). With lighting coil regulated in 12v

Bultaco 325 con rod kit Sherpa, Alpina & Pursang

Pistons and con rods

Bultaco 325 con rod kit Sherpa, Alpina & Pursang

Bultaco

443-H

€167.00

Crankshaft axle 20mmx56mm. Also OK for 250cc with 20mm crankshaft axle. Piston axle 20mm (see details below)

Exhaust

Bultaco exhaust elbow (series 80/85)

Bultaco

1424-J

€174.95

Compatible with : - Bultaco Sherpa 250 and 350 series 80 - Alpina 250 series 85 Exhaust elbow origin compatibility with flange and nut mounting.

Engine gaskets

Bultaco 74, 100 & S100 Lobito and Sherpa gasket set

Bultaco

P26-K

€42.95

Gasket set compatibility : Bultaco Brinco 75 (Mod 108 from 1973 to 1976) Bultaco Junior 74 (Mod 20 from 1966 to 1967) Bultaco Junior 100 (Mod 33 from 1967 to 1971) Bultaco Lobito 74 (Mk2 Mod 32 from 1967 to 1969) Bultaco Lobito 100 (Mod 19 from 1966 to 1969) Bultaco Sherpa S100 (Mod 3 & Mod 30 from 1962 to 1967)

kick-start, footrest, tensioners etc

Bultaco Sherpa 250 / 350 right rear brake lever

Bultaco

235A-H

€59.95

Bultaco 350 Sherpa (340 - 6 speeds) con rod kit

Pistons and con rods

Bultaco 350 Sherpa (340 - 6 speeds) con rod kit

Bultaco

443B-H

€177.00

For models with crankshaft axle 24x56 mm. Piston axle 20mm (see details below)

Engine spares

Bultaco Sherpa 250 & 350 double primary transmission chain tensioner

Bultaco

153-H

€42.75

Plastic and Mudguards

BULTACO front mudguard mud-flap

Bultaco

254-H

€15.95

Stickers

Bultaco pair of tank stickers . diameter 5.7cm

Bultaco

STICK5-G

€17.95

Bultaco Sherpa front and rear brake shoes (rain/mud)

Rupture de stock

Brakes

Bultaco Sherpa front and rear brake shoes (rain/mud)

Bultaco

FREIN6-G

€25.95

Rain/sand/mud grooved trim. Bultaco Sherpa (from Type 124 upwards) front or rear brake pads/shoes. For earlier models, the front shoes remain the same, but for the rear the reference is #FREIN18.

View

Bultaco Sherpa front and rear brake shoes (Pro)

Rupture de stock

Brakes

Bultaco Sherpa front and rear brake shoes (Pro)

Bultaco

FREIN35-G

€29.95

Smooth pro trim. Bultaco Sherpa (from Type 124 upwards) front or rear brake pads/shoes. For earlier models, the front shoes remain the same, but for the rear the reference is #FREIN18.

View

Exhaust

Bultaco exhaust elbow (series 91/92)

Bultaco

1425-J

€164.95

Compatible with : - Bultaco Sherpa 250 series 91 and 92 Exhaust elbow origin compatibility in spring assembly.

Cables

BULTACO Brake pedal fixing kit

Bultaco

E237

€13.95

Engine spares

Bultaco double primary transmission chain 52 links

Bultaco

227D-H

€69.00

Pistons and con rods

Bultaco Sherpa T 125cc piston with clips pin and rings diam 54.45 mm

Bultaco

PISTB2-G

€187.00

156 & 185 series

Engine gaskets

Bultaco Lobito T 74, Sherpa T 74 and T 125 gasket set

Bultaco

P01-K

€64.95

Gasket set compatibility : Bultaco Frontera 125 (Mod 186 from 1976 to 1978) Bultaco Frontera 74 (Mod 174 from 1976 to 1979) Bultaco Lobito T 74 (Mk9 Mod 155 from 1975 to 1976) Bultaco Sherpa T 125 (Mod 185 from 1976 to 1978) Bultaco Sherpa T 74 (Mod 184 from 1976 to 1978) Bultaco Streaker 125 (Mod 204 from 1977 to 1979) Bultaco Streaker 74 (Mod 179 from...

Exhaust

Bultaco Sherpa Silencer (28mm)

Bultaco

1402-J

€238.95

Bultaco Sherpa (28mm) aluminum silencer refurbishable, compatible with original line.

Engine gaskets

Bultaco 125 & 175 Lobito and S175 & 250 T Sherpa gasket set

Bultaco

P27-K

€42.95

Gasket set compatibility : Alpina 125 (Mod 97 from 1973 to 1974) Alpina 175 (Mod 98 from 1973 to 1974) Alpina 250 (Mod 85 from 1971 to 1974) Campera 175 (Mk2 Mod 28, 57 & 79 from 1962 to 1972) Lobito 125 (Mk6 Mod 95 from 1972 to 1973) Lobito 125 (Mk7 Mod 127 from 1973 to 1974) Lobito 175 (Mk4 Mod 76 & 77 from 1971) Lobito 175 (Mk6 & Mk7 Mod...

Rupture de stock

Exceptional Motorcycles

Bultaco Sherpa 250 type 198A

Bultaco

pechbul archive

€2,795.00

SOLD

View

Bultaco Sherpa T 125cc piston with clips pin and rings diam 55 mm

Rupture de stock

Pistons and con rods

Bultaco Sherpa T 125cc piston with clips pin and rings diam 55 mm

Bultaco

PISTB3-G

€186.95

156 & 185 series

View

Engine spares

Bultaco oil filler cap

Bultaco

E209archive

€19.95

Clutch side

Brakes

Bultaco Sherpa (1st models) rear brake shoes (rain/mud)

Bultaco

FREIN18-G

€49.50

Rain/sand/mud grooved trim. Bultaco Sherpa (all model before Type 124) rear brake pads/shoes.

Exhaust

Bultaco Sherpa Silencer (31mm)

Bultaco

1403-J

€238.95

Bultaco Sherpa (31mm) aluminum silencer refurbishable, compatible with original line.

Engine spares

Bultaco Sherpa 250 & 350 aluminium clutch adjuster cover

Bultaco

E141

€19.95

Bultaco Lobito 125cc piston with clips pin and rings diam 54.45 mm

Pistons and con rods

Bultaco Lobito 125cc piston with clips pin and rings diam 52.25 mm

Bultaco

PISTB1-G

€175.00

127 & 148 series

Engine gaskets

Bultaco Sherpa 250 et Alpina 175 & 250 gasket set

Bultaco

P02-K

€58.95

Gasket set compatibility : Bultaco Alpina 175 (Mod 189 from 1976 to 1977) Bultaco Alpina 250 (Mod 158 from 1975 to 1976) Bultaco Alpina 250 (Mod 187 from 1976 to 1977) Bultaco Alpina 250 (Mod 212 from 1977 to 1979) Bultaco Alpina 250 (Mod 165 from 1976) Bultaco Sherpa 250 (Mod 137 from 1974 to 1976) Bultaco Sherpa T 250 (Mod 182 from 1976 to 1978)...

Frame

Bultaco Sherpa rear swing arm rubber pad

Bultaco

E104

€13.95

Engine gaskets

Bultaco 250 Frontera MK 8, MK 10 and MK 11gasket set

Bultaco

P22-K

€42.95

Frame

Bultaco Sherpa sump guard chain rubber pad

Bultaco

E165

€14.95

Pistons and con rods

Bultaco 250 piston with clips pin and rings diam 72 mm

Bultaco

PISTB4-G

€197.00

kick-start, footrest, tensioners etc

Bultaco Sherpa 250 / 350 right folding gear lever

Bultaco

229-Harchive

€55.95

Engine gaskets

Bultaco 250 and 350 Sherpa T gasket set

Bultaco

P29-K

€47.95

Gasket set compatibility : Bultaco Alpina 350 (Mod 116 from 1974) Bultaco Astro 360 (Mod 123 from 1973 to 1974) Bultaco Pursang 360 (Mk7 Mod 121 from 1973 to 1974) Bultaco Sherpa T 250 (Mod 150 from 1975) Bultaco Sherpa T 350 (Mod 151 from 1975)

Rollers bearings (Engine)

Bearing 16x19x17.6

Bultaco

1263-F

€19.95

Bultaco Lobito up to 1975 with 16mm pin

Frame

Bultaco sherpa T side stand rubber

Bultaco

E023

€9.95

kick-start, footrest, tensioners etc

Bultaco Sherpa 250 / 350 right gear lever

Bultaco

229D-Harchive

€59.70

Pistons and con rods

Bultaco 250 piston with clips pin and rings diam 72.5 mm

Bultaco

PISTB5-G

€197.00

Exhaust

Bultaco exhaust rubber

Bultaco

221-H

€13.95

10 cm long & 45mm for the internal diameter

Frame

BULTACO Sherpa tank rubber pad

Bultaco

E172

€4.95

Unit price. Center rubber under the tank

Pistons and con rods

Bultaco 250 piston with clips pin and rings diam 73 mm

Bultaco

PISTB6-G

€197.00

Engine gaskets

Bultaco 350 Sherpa, Pursang, Astro & Alpina gasket set

Bultaco

P04-K

€41.95

Motors with 7cm stud spacing. Gasket set compatibility : Bultaco Alpina 350 (Mod 99 from 1973 to 1974) Bultaco Astro 350 (Mk6 Mod 106 from 1972 to 1973) Bultaco Pursang 350 (Mk5 Mod 87 from 1971 to 1972) Bultaco Pursang 350 (MK6 Mod 104 from 1972 to 1973) Bultaco Sherpa T 350 (Mod 92 from 1972 to 1974) Bultaco Sherpa T 350 (Mod 125 from 1974)

oil seals (Engine)

Washer 12x32x10

Bultaco

1245-F

€8.95

BULTACO 125 to 350 front wheel right & left. Unit price

Rupture de stock

Tanks

Bultaco tank TYpe198A & 199A

Bultaco

res198bl-K

€348.95

View

Bultaco Sherpa 250 / 350 Alloy left hand gear lever

Rupture de stock

kick-start, footrest, tensioners etc

Bultaco Sherpa 250 / 350 Alloy left hand gear lever

Bultaco

169-H

€58.95

View

Brakes

BULTACO Rear brake adjusting screw

Bultaco

E184

€17.45

Pistons and con rods

Bultaco 250 - 270 piston with clips pin and rings diam 76 mm

Bultaco

PISTB7-G

€197.00

To transform a 250 Bultaco into a 270 cc one.

Engine gaskets

Bultaco 350 Alpina et 350 Sherpa gasket set

Bultaco

P03-K

€65.95

Motors with 8.5cm stud spacing. Gasket set compatibility : Bultaco Alpina 350 (Mod 166 from 1976) Bultaco Alpina 350 (Mod 188 from 1976 to 1977) Bultaco Sherpa T 350 (Mod 159 from 1975 to 1976) Bultaco Sherpa T 350 (Mod 183 from 1976 to 1977) Bultaco Sherpa T 350 (Mod 191 from 1976 to 1978) Bultaco Sherpa T 350 (Mod 199b 4V from 1981)

Engine spares

Bultaco Sherpa 250 & 350 oil drain plug

Bultaco

E190

€13.95

with magnet and washer

Frame

BULTACO Sherpa tank rubbers assembly

Bultaco

252-H

€15.95

oil seals (Engine)

Washer 14X20X3

Bultaco

1023-F

€8.95

BULTACO Internal secondary shaft left side (gearbox axle sproket). Unit price.

Tanks

Bultaco tank TYpe198A & 199A

Bultaco

res198r-K

€348.95

Engine gaskets

Bultaco 350 Sherpa T (Type 199) and Alpina (Type 213) gasket set

Bultaco

P25-K

€57.95

Bultaco Sherpa T (Type 199) and Alpina (Type 213)

Engine spares

Bultaco Sherpa 250 & 350 fly wheel bolt

Bultaco

E091

€19.95

Pistons and con rods

Bultaco 350 piston with clips pin and rings diam 83.6 mm

Bultaco

PISTB8-G

€233.94

Exhaust

Bultaco 350, exhaust gasket

Bultaco

E001

€14.95

56mm between holes.

Exhaust

Bultaco 350, exhaust gasket

Bultaco

E136

€15.95

52mm between holes.

Engine gaskets

Bultaco Sherpa 125,250 and 350 clutch case washer

Bultaco

97J1-K

€8.95

Bultaco 350 piston with clips pin and rings diam 84mm

Rupture de stock

Pistons and con rods

Bultaco 350 piston with clips pin and rings diam 84mm

Bultaco

PISTB9-G

€225.00

View

Speedometers

Bultaco 250, 325, & 350 long speedo cable

Bultaco

516A-A

€37.50

From the rear wheel to the handelbar

Frame

Bultaco 250 & 350 swinging arm washer

Bultaco

1045-F

€9.85

Bultaco 250 & 350 swinging arm size 24x32x4

kick-start, footrest, tensioners etc

Bultaco Sherpa gear lever rubber pad

Bultaco

E226

€7.95

with logo

Bultaco Sherpa (model 10, 27, 49, 80) swingarm axle 12mm

Frame

Bultaco Sherpa (model 10, 27, 49, 80) swingarm axle 12mm

Bultaco

220A-H

€27.95

Sherpa 12mm swingarm axle with 2 nuts and washers for models 10, 27, 49, 80. Total length 250mm

Bultaco Pursang & Metralla center cases washer

Engine gaskets

Bultaco 250 & 350 center cases washer

Bultaco

98j7-K

€8.70

Engine spares

Bultaco Ignition case rubber

Bultaco

E231

€9.95

Bultaco 350 piston with clips pin and rings diam 84,45mm

Rupture de stock

Pistons and con rods

Bultaco 350 piston with clips pin and rings diam 84,45mm

Bultaco

PISTB10-G

€234.00

View

Speedometers

Bultaco 250, 325, & 350 long speedo

Bultaco

518-A

€35.95

From the rear wheel to the engine

kick-start, footrest, tensioners etc

BULTACO SHERPA kick-start lever assembly

Bultaco

228-H

€107.70

Tools

Flywheel extractor Bultaco Sherpa (33mm x 150)

Bultaco

E049

€18.95

Also suitable for all motorcycles with Femsa 33mm ignition and some rare Motoplat 33mm ignitions which are normally 30x150.

Bultaco Sherpa (model 91 to 151) swingarm axle 12mm

Frame

Bultaco Sherpa (model 91 to 151) swingarm axle 12mm

Bultaco

220B-H

€27.95

Sherpa 12mm swingarm axle with 2 nuts and washers for models 91, 92, 124, 125, 150, 151. Total length 240mm

Pistons and con rods

Bultaco 350 piston with clips pin and rings diam 85.25 mm

Bultaco

PISTB11-G

€234.00

Engine gaskets

Bultaco Sherpa 250 350 ignition case washer

Bultaco

97J2-K

€8.95

Front Fork (Spares & Dust covers)

Bultaco Sherpa pair of front fork bracket pad

Bultaco

E061

€11.95

Engine spares

BULTACO Sherpa Key (woodruff) flywheel side

Bultaco

E033

€5.95

3x7.5x18.2 mm

Ignition

Bultaco FEMSA condenser

Bultaco

2Y13-B

€18.95

Cables

Bultaco 250, 325, & 350 Montesa Ossa etc Throttle cable

Bultaco

500B-A

€33.95

Bultaco 250 à 350, Ossa, Montesa with AMAL carburator

kick-start, footrest, tensioners etc

Bultaco Sherpa kick-start rubber pad

Bultaco

E106

€8.95

with logo

Bultaco Sherpa (from model 158) swingarm axle 14mm

Frame

Bultaco Sherpa (from model 158) swingarm axle 14mm

Bultaco

173-H

€27.95

Sherpa 14mm swingarm axle with 2 nuts and washers for models from type 158. Total length 240mm

kick-start, footrest, tensioners etc

Bultaco complete chain tensioner

Bultaco

123-H

€29.95

Front Fork (Spares & Dust covers)

Bultaco Sherpa 250 & 350 fork dust cover

Bultaco

230-H

€9.95

From Type 151 Unit price

Ignition

Bultaco FEMSA points

Bultaco

2Y14-B

€23.95

All models

Chain - Sprockets

Bultaco Lobito and Sherpa T 125 (After 1975) 54t crown (428) diameter 139 mm

Bultaco

1267-F

€73.95

Bultaco Lobito and Sherpa T 125 (After 1975) 54t crown (428) diameter 139 mm

Pistons and con rods

Bultaco 350 piston with clips pin and rings diam 85.50 mm

Bultaco

PISTB12-G

€234.00

Frame

Bultaco Sherpa (from model 158) swingarm axle 14mm

Bultaco

173B-Harchive

€18.95

Sherpa 14mm swingarm axle with 2 nuts and washers for models from type 158. Total length 240mm

Engine gaskets

Bultaco Pursang & Metralla center cases washer

Bultaco

98j6-K

€8.70

Wheels (Wheels-Spokes-spares-Axles)

BULTACO Set of front rear spokes

Bultaco

RAY11-G

€84.95

From Type 159

Front Fork (Spares & Dust covers)

Bultaco Sherpa 250 & 350 pair of fork dust cover

Bultaco

245-H

€9.95

First models until type 151

kick-start, footrest, tensioners etc

Bultaco chain tensioner pad

Bultaco

175-H

€11.95

Chain - Sprockets

Bultaco Lobito and Sherpa T 125 (After 1975) 62t crown (428) diameter 139 mm

Bultaco

1268-F

€73.95

Bultaco Lobito and Sherpa T 125 (After 1975) 62t crown (428) diameter 139 mm

Wheels (Wheels-Spokes-spares-Axles)

BULTACO Set of front steel spokes

Bultaco

RAY5-G

€84.95

From Type 159

Engine gaskets

Bultaco primary shaft Clutch plate

Bultaco

E145A

€2.45

side washer

Cables

Bultaco 250, 325, & 350 front brake cable

Bultaco

500C-A

€36.95

Engine gaskets

Bultaco o-ring front sprocket axle

Bultaco

E145D

€2.95

Cables

Bultaco 250, 325, & 350 rear brake cable

Bultaco

516-A

€37.70

Oil, air filters

BULTACO Alpina air filter foam with sleeve

Bultaco

475TT-H

€32.95

In one piece, the ultimate dust weapon Air box sleeve with air filter for Bultaco Alpina (models 165 to 213) Dimensions : - Carburetor side 44mm

Rupture de stock

Exceptional Motorcycles

BULTACO 350 Type 159 -183

Bultaco

bulst2012

€4,150.00

SOLD

View

Engine gaskets

Bultaco crank o-ring right side

Bultaco

E145B

€2.95

Cables

Bultaco 250, 325, & 350 Clutch cable

Bultaco

500A-A

€33.95

Oil, air filters

BULTACO air filter foam with sleeve (Mikuni)

Bultaco

2Y09-B

€29.95

From one part, the absolute weapon for dust For Bultaco Sherpa with Mikuni Carburetor (diameter 44mm)

Engine gaskets

Bultaco crank washer receiver, o-ring

Bultaco

E026

€3.95

right or left hand

Engine gaskets

Bultaco Sherpa 250 cylinder base gasket

Bultaco

99J1-K

€4.95

Bultaco Aluminium rear sprocket 39T link size 520, int diameter 140mm

Chain - Sprockets

Bultaco Sherpa T Crown 39t (520) diameter 139mm

Bultaco

1021-F

€49.95

Bultaco Sherpa T (All models from 1975 to the end) 39-tooth crown (520) diameter 139mm

Bearings (Engine)

Bearing (25X52X18) 62205.2RS

Bultaco

716-F

€39.95

BULTACO all twinshock models cluch housing. Unit price.

Engine gaskets

Bultaco Sherpa 350 cylinder base gasket

Bultaco

99J2-K

€4.95

Early model unril type 92

Bultaco Aluminium rear sprocket 40T link size 520, int diameter 140mm

Chain - Sprockets

Bultaco Sherpa T Crown 40t (520) diameter 139mm

Bultaco

1031ter-F

€51.95

Bultaco Sherpa T (All models from 1975 to the end) 40-tooth crown (520) diameter 139mm

Oil, air filters

Bultaco 125, 250 & 350 Complete air box

Bultaco

466-H

€169.95

Here, at last, is a reproduction of the original airbox for all our Bultaco Sherpa 125, 250 and 350 models from 1977 to 1980 Series 197, 198 and 199. Perfectly compatible with all our machines' original components, it will supply air to the engine in exactly the same way as the original box. 3D-printed part, hard structure.

Front Fork (Rollers & washers)

Bultaco and Montesa Steering bearing protectors

Bultaco

E108

€5.95

All types of Montesa and Bultaco. Dimensions : Outside 59mm Inside 26mm

Engine gaskets

Bultaco Sherpa 350 cylinder base gasket

Bultaco

99J3-K

€5.95

Late model after type 92

Bultaco Aluminium rear sprocket 41T link size 520, int diameter 140mm

Chain - Sprockets

Bultaco Sherpa T Crown 41t (520) diameter 139mm

Bultaco

1297-F

€53.95

Bultaco Sherpa T (All models from 1975 to the end) 41-tooth crown (520) diameter 139mm

Bultaco Aluminium rear sprocket 42T link size 520, int diameter 140mm

Chain - Sprockets

Bultaco Sherpa T Crown 42t (520) diameter 139mm

Bultaco

1298-F

€54.95

Bultaco Sherpa T (All models from 1975 to the end) 42-tooth crown (520) diameter 139mm

Plastic and Mudguards

BULTACO Side panel rubber

Bultaco

E234

€3.50

Chain - Sprockets

Bultaco Sherpa T Crown 44t (520) diameter 139mm

Bultaco

617-F

€55.95

Bultaco Sherpa T (All models from 1975 to the end) 44-tooth crown (520) diameter 139mm

Engine gaskets

Bultaco 250 cylinder head gasket

Bultaco

P33-K

€38.95

Copper cylinder head gasket for Bultaco 250cc (all models having an original one).

Engine gaskets

Bultaco 350 cylinder head gasket

Bultaco

P33B-K

€38.95

Copper cylinder head gasket for Bultaco 350cc (all models having an original one).

Tools

BULTACO 8x50 mm screw

Bultaco

E030

€0.75

Plastic and Mudguards

BULTACO Sherpa Side panels

Bultaco

1106-Jarchive

€79.00

Except type 340 6 speeds

Rollers bearings (Engine)

bearing 20X24X10

Bultaco

840-F

€15.95

Bultaco piston side bearing, from type 159 ( Two side by side needed)

Wheels (Wheels-Spokes-spares-Axles)

MONTESA 247 Set of rear Steel spokes

Bultaco

RAY14-G

€84.95

Montesa 247 for wheels with 190mm spokes

Tools

BULTACO 10x50 mm screw

Bultaco

E032

€0.95

Rollers bearings (Engine)

bearing 20X24X23

Bultaco

1290-F

€19.95

Bultaco piston side bearing, from type 159 (to be used without the two side disks)

Chain - Sprockets

Bultaco Sherpa T Crown 46t (520) diameter 139mm

Bultaco

618-F

€57.95

Bultaco Sherpa T (All models from 1975 to the end) 46-tooth crown (520) diameter 139mm

Tools

BULTACO 12x60 mm screw

Bultaco

E042

€1.45

Chain - Sprockets

Bultaco Sherpa T Crown 48t (520) diameter 139mm

Bultaco

619-F

€58.95

Bultaco Sherpa T (All models from 1975 to the end) 48-tooth crown (520) diameter 139mm

Rollers bearings (Engine)

bearing 20X24X30

Bultaco

841-F

€29.95

piston side bearing, models before type 159

Chain - Sprockets

Bultaco Sherpa T Crown 52t (428) diameter 146mm

Bultaco

620-F

€52.95

52-tooth crown (428) diameter 146mm Compatible with: Bultaco Sherpa T (All models prior to 1974) Alpina, Pursang, Matador

Tanks

BULTACO Sherpa Fuel tap

Bultaco

323B-H

€15.70

35mm between the two fixing holes

Chain - Sprockets

Bultaco Sherpa T Crown 56t (428) diameter 146mm

Bultaco

621-F

€59.95

56-tooth crown (428) diameter 146mm Compatible with: Bultaco Sherpa T (All models prior to 1974) Alpina, Pursang, Matador

Chain - Sprockets

Bultaco Sherpa T Crown 60t (428) diameter 146mm

Bultaco

622-F

€59.95

60-tooth crown (428) diameter 146mm Compatible with: Bultaco Sherpa T (All models prior to 1974) Alpina, Pursang, Matador

Tanks

BULTACO Sherpa Fuel tap washer

Bultaco

E178

€1.75

10mm internal diameter

Chain - Sprockets

Bultaco Sherpa T Crown 40t (520) diameter 146mm

Bultaco

623-F

€48.95

40-tooth crown (520) diameter 146mm Compatible with: Bultaco Sherpa T (All models prior to 1974) Alpina, Pursang, Matador

oil seals (Engine)

Washer 18x32x8

Bultaco

1306-F

€8.95

Tanks

Bultaco Sherpa tank cap with logo (scew diameter 47mm

Bultaco

327-H

€15.95

For 198 & 199 models

Chain - Sprockets

Bultaco Sherpa T Crown 44t (520) diameter 146mm

Bultaco

624-F

€52.95

44-tooth crown (520) diameter 146mm Compatible with: Bultaco Sherpa T (All models prior to 1974) Alpina, Pursang, Matador

Rupture de stock

Exceptional Motorcycles

BULTACO Sherpa T serie 49

Bultaco

CharlesC1

€3,500.00

SOLD

View

Chain - Sprockets

Bultaco Sherpa T Crown 48t (520) diameter 146mm

Bultaco

625-F

€56.95

48-tooth crown (520) diameter 146mm Compatible with: Bultaco Sherpa T (All models prior to 1974) Alpina, Pursang, Matador

Rupture de stock

Tanks

Bultaco Sherpa tank cap with logo (scew diameter 50 mm

Bultaco

326B-H

€15.95

For Campeon models

View

Oil, air filters

Montesa Cota 348 & 349 Complete air box

Bultaco

168-H

€178.95

Here, at last, is a reproduction of the original airbox for all our Montesa Cota 348 and Montesa Cota 349. Perfectly compatible with all our machines' original components, it will supply air to the engine in exactly the same way as the original box. 3D-printed part, hard structure.

Oil, air filters

Montesa Cota 348 & 349 Air box cover

Bultaco

251-H

€37.95

Here, at last, is a reproduction of the original cover airbox for all our Montesa Cota 348 and Montesa Cota 349. Perfectly compatible with all our machines' original components. 3D-printed part, hard structure.

Rupture de stock

Exceptional Motorcycles

BULTACO Sherpa T 250 T4 from 1967

Bultaco

CharlesC2

€5,500.00

SOLD

View

Oil, air filters

Montesa Cota 348 and 349 Pair of Air Box Filter Screens

Bultaco

168A-H

€18.95

Montesa Cota 348 and 349 Pair of Air Box Filter Screens Perfectly compatible with all our machines' original components. 3D-printed part, hard structure.

Rupture de stock

Exceptional Motorcycles

BULTACO Alpina 350

Bultaco

Alpina

€3,250.00

SOLD

View

Chain - Sprockets

Bultaco Sherpa T Crown 50t (520) diameter 146mm

Bultaco

625TT-Farchive

€56.95

50-tooth crown (520) diameter 146mm Compatible with: Bultaco Sherpa T (All models prior to 1974) Alpina, Pursang, Matador

Chain - Sprockets

Bultaco Sherpa T Crown 42t (520) diameter 152mm

Bultaco

598-F

€50.95

Bultaco Sherpa T (all models prior to 1974), Alpina, Pursang, and Frontera 42-tooth sprocket (520) diameter 152 mm

Chain - Sprockets

Bultaco Sherpa T Crown 46t (520) diameter 152mm

Bultaco

598A-F

€51.95

Bultaco Sherpa T (all models prior to 1974), Alpina, Pursang, and Frontera 46-tooth sprocket (520) diameter 152 mm

Chain - Sprockets

Bultaco Sherpa T Crown 50t (520) diameter 152mm

Bultaco

598B-F

€52.95

Bultaco Sherpa T (all models prior to 1974), Alpina, Pursang, and Frontera 50-tooth sprocket (520) diameter 152 mm

Bultaco Sherpa T front 11T spocket, link size 520

Rupture de stock

Chain - Sprockets

Bultaco Sherpa T front 11T spocket, link size 520

Bultaco

E005

€38.95

View

Chain - Sprockets

Bultaco Sherpa T front 12T spocket, link size 520

Bultaco

E149

€38.95

Rupture de stock

Exceptional Motorcycles

BULTACO 350 type 183

Bultaco

Gerald183

€4,750.00

SOLD

View

Chain - Sprockets

Bultaco Sherpa T front 13T spocket, link size 520

Bultaco

E008

€38.95

Chain - Sprockets

Bultaco Sherpa T front 16T spocket, link size 428

Bultaco

297-Earchive

€39.00

Carburetor

BULTACO Alpina Carburettor / air filter connector

Bultaco

474TT-Harchive

€24.95

Air box sleeve for Bultaco Alpina (models 165 to 213) Dimensions : - Carburetor side 44mm - Air box side 50mm

Carburetor

BULTACO Carburetors to air box hose

Bultaco

209-H

€22.95

Bultaco carburetor connector - air filter for Bing and Mikuni carburetors. Inner diameter on carburetor side: 45 mm 3D-printed part, flexible structure.

Rupture de stock

Exceptional Motorcycles

Bultaco Sherpa 350 Type 199

Bultaco

1071archive

€2,950.00

SOLD

View

oil seals (Engine)

25X40X12 washer

Bultaco

792-F

€9.95

BULTACO 125, 250, 325, 350 (all types) crank shaft left side (except Type 92 and earlier). Unit price.

Grips, levers, handle bars

Bultaco pair handelbar grip with logo

Bultaco

461-H

€13.70

Carburetor

BULTACO Carburetors to air box hose

Bultaco

322-H

€22.95

Bultaco carburetor connector - air filter for Amal carburetor. Inner diameter on carburetor side: 50 mm 3D-printed part, flexible structure.

Carburetor

BULTACO Carburetors to air box hose

Bultaco

196-H

€19.95

Bultaco early models

Rupture de stock

Exceptional Motorcycles

Bultaco Sherpa 250 type 198A

Bultaco

637archive

€2,600.00

SOLD

View

Rupture de stock

Exceptional Motorcycles

Bultaco Sherpa 350 Type 159

Bultaco

640archive

€1,500.00

SOLD

View

Rupture de stock

Exceptional Motorcycles

Bultaco Sherpa 350 Type 199 de 1978

Bultaco

1079

€2,250.00

SOLD

View

kick-start, footrest, tensioners etc

Yamaha TY 125 & 175 rear brake lever

Bultaco

224-H

€62.95

oil seals (Engine)

32X45X7 washer

Bultaco

810-F

€10.95

BULTACO 350 until 1973 (Type 92 and earlier) right crankshaft. Unit price.

oil seals (Engine)

32X47X12 washer

Bultaco

911-F

€14.95

BULTACO 125, 250, 325, 350 (all types) crank shaft right side (Except type 92 and earlier). Unit price.

oil seals (Engine)

35X45X4 washer

Bultaco

1277-F

€10.95

BULTACO 340 (6 gears ratio) secondary shaft left side (gearbox axle sproket). Unit price.

Rider Gear

Maintenance & Tools

Engine Parts

Chassis Components

Bodywork & Plastics

Rider Gear

Maintenance & Tools

Engine Parts

Chassis Components

Bodywork & Plastics

List of products by brand Bultaco