Resin and paint stripper 750ml

Properties:

- Restom DKPANT 4031 does not blacken aluminium or its alloys and is not aggressive to metals.

- Use on plastics: 2 hours maximum with regular monitoring.

- Restom DKPANT 4031 can also be used to strip tank linings (poor quality products, or badly applied resin, etc.) by following the stripping procedure.

- Particularly recommended for the easy removal of bituminous underbody coatings (Blackson) without a blowtorch. Given the considerable thickness of this type of coating, allow 1 to 2 litres for an average-sized car.

Information :

- Apply with a brush or by flowing for the inside of a tank.

- Stripping time varies from a few minutes to several hours depending on the nature of the paint and the number of coats (several days for the inside of a tank).

- You can then scrape or rinse directly with water.

Note: 

To find out if our Dkpant 4031 is effective on an old tank lining, you can send us a sample of the lining with your contact details to 

Restom

for the attention of the laboratory

20 rue du 1er Mai

71500 Louhans

We will do the analysis free of charge before delivering the results, please allow 1 to 2 weeks after receiving the sample.