Engine

Out-of-Stock

Rock wool in bulk

For reconditioning your exhaust silencer. Size: 250 grams Resistance: 650° temperature

€11.95

Available

Montesa Cota 247, 348 et 349 kick start return spring

€21.95

Available

Washer 10X22X7

Yamaha TY 125 & 175Oil pump main axle

€7.95

Available

Bearing (12X37X12) 7301

MONTESA Cota 123, 172 & 200 left primary shaft. Very technical and unique bearing with angular contact.  Unit price.

€34.95

Available

bearing 12X15X13

€7.70

Available

300 (FM403), 301 (FM266) & 303 (FM364) complete engine rebuilt kit

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

€180.00

Available

Competition Spark plug resistor cover with wire NGK

.

€38.95

Available

BULTACO clutch lever ball

€1.45

Out-of-Stock

DELLORTO PHBL25 BS carburetor (Fantic 200 or 240)

Dellorto PHBL 25 BS carburetor can be prepared for Fantic 200 (TX350) or Fantic 240 (FM450). To be specified when ordering. Preparations are in the ideal original...

€164.95

Available

Compact 16, 18 & 21mm plug spanner

- Spark plug wrench 16, 18 and 21mm - Length 72mm

€7.95

Out-of-Stock

Bultaco Chispa gasket set

Chispa (Mod 111 from 1974 to 1980)

€19.95

Available

bearing 12X15X14.5

€7.90

Available

Montesa Cota 247, 348 & 349 Shifter return spring

€13.65

Available

Rear silencer cap

-

€6.95

Out-of-Stock

Bearing (15X35X11) 7202 BA

MONTESA cota 247, 348 & 349 Right hand of primary shaft.  Very technical and unique bearing with angular contact.  Unit price.

€29.95

Out-of-Stock

Bultaco 250 con-rod kit Sherpa, Pursang & Frontera

model with crank shaft 24mm x 56mm axle (From type 159) piston axle 16mm (see details below)

€157.00

Out-of-Stock

Bultaco Sherpa 250 & 350 primary transmission chain tensioner

€26.95

Available

Honda TLR 200 complete engine rebuilt kit

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

€172.95

Available

Bultaco 74, 75 et 100 Lobito gasket set

Gasket set compatibility :  Bultaco Lobito 74 (Mk3 Mod 59 from 1969 to 1972) Bultaco Lobito 74 (Mk6 Mod 94 from 1972 to 1973) Bultaco Lobito 75 (Mk7 Mod 126 from 1973...

€44.95

Available

7.5 cm BULTACO Rear Silencer fixing spring

€3.95

Available

Compact 21mm plug spanner

21mm compact spark plug wrench

€6.95

Available

BULTACO Clutch lever (cam)

€29.95

Out-of-Stock

Bultaco 325 Sherpa, Alpina, Pursang con rod kit

For models with crankshaft axle 20x46 to 48mm . Also OK for all 250 Sherpa with 20mm cranshaft axle after 1974 (see details below)

€177.00

Available

bearing 12X15X16.5

Yamaha TY 50 & 80 con rod small end

€18.95

Out-of-Stock

Clutch and fly wheel wrench

Locking wrench for holding the clutch nut, flywheel, gearbox output pinion or any other gear while tightening/loosening the nut. - Maximum opening: 130mm

€32.95

Available

Bearing (15X35X11) 6202

BULTACO (all models twinshock) intermediate shaft right & left.  FANTIC 50 (FM330), 80 (FM430), 240 (FM450), 300 (FM403), 301 (FM266) & 303 (FM364) secondary shaft...

€11.70

Available

Washer 12X19X5

Yamaha TY125 & 175 folding gear lever axle left side.  Unit price.

€7.95

Out-of-Stock

Bultaco Sherpa 250 & 350 primary transmission chain

€78.95

Available

Bultaco 125 Lobito and S125 Sherpa gasket set

Gasket set compatibility : Alpina 250 (Mod 115 from 1974) Lobito 125 (Mk3 Mod 62 from 1970 to 1972) Lobito 125 (Mk4 Mod 74 from 1970 to 1971) Sherpa S125...

€42.95

Available

Bearing 14X18X10

OSSA 250 & 350 primary shaft right side. Unit price.

€15.95

Available

Carburetor HONDA TLR 200, 250

Finally a real perfect copy (not chinese) of the original Keihin carburetors mounted on Honda TLR 200 & 250 which have not been produced for many years. Pre-set....

€149.70

Available

Compact ratchet 21mm plug spanner

€18.95

Available

6 cm BULTACO Exhaust fixing spring

€2.95

Available

MONTESA 123 & 172 Trial complete engine rebuilt kit

Complete engine washers, rollers and gaskets set. Equivalent to a 10% discount, compared to the price of each item bought separately.

€205.00

Out-of-Stock

FANTIC 125 Minarelli clutch plates complete

For FANTIC 125 (TX250 from 1980) TX350 and FM350. Plate external diameter 109mm   Your clutch is slipping when using the last gear ? You have to know that (Except Montesa...

€37.70

Out-of-Stock

Bultaco Sherpa 125 primary transmission chain

For 125T models except Lobito

€78.95

Available

YAMAHA 175 gear box shift spring

€5.75

Available

BULTACO 125, 250 & 350 Trial (all models) electronic ignition

Comes with (French & english) instruction sheet without flywheel extractor (27x125). With lighting coil regulated in 12v

€439.95

Available

Bultaco 325 con rod kit Sherpa, Alpina & Pursang

Crankshaft axle 20mmx56mm. Also OK for 250cc with 20mm crankshaft axle. Piston axle 20mm (see details below)

€167.00

Available

Bearing (15x35x11) 6202 EE

FANTIC 200 (TX350), 240 (FM450) & 300 (FM403 ) front wheel (X2) HONDA TLR 200 primary shaft left side YAMAHA TY 125, 175 & 250 right rear wheel + YAMAHA TY 250...

€14.95